Electric Hob Repair: Quick Fixes & When to Call a Pro

If your electric hob suddenly goes quiet, you’re probably wondering what to do next. The good news is most hiccups are easy to sort out with a few simple steps. Below we’ll walk through the most common reasons a hob quits, how to reset it, and the DIY checks you can do before picking up the phone.

Common Reasons an Electric Hob Stops Working

First, let’s look at why the hob might be misbehaving. In most homes the culprits are:

• Tripped safety switch. Many hobs have a built‑in safety feature that cuts power if it gets too hot.
• Loose connection. A plug that’s not fully seated or a worn power cord can cause intermittent loss of power.
• Burned‑out element. If one of the heating zones is dead, the whole hob may refuse to turn on.
• Control board fault. The electronic panel that controls the rings can fail, especially after a power surge.
• Kids or pets hitting the touch controls and accidentally switching the hob off.

Knowing which of these fits your situation will save you time. For example, if only one ring is dead, you probably need a replacement element rather than a full reset.

Step‑by‑Step Reset and DIY Fixes

Got a basic power issue? Try this reset before you call a technician:

1. Turn off the hob. Use the main switch on the unit or switch off the circuit breaker for extra safety.
2. Unplug the appliance. Leave it unplugged for about 60 seconds. This clears any lingering charge in the electronic board.
3. Press the reset button. Some models have a small reset button hidden behind the control panel. Hold it for 3‑5 seconds.
4. Plug it back in and test. Turn the power back on and try each cooking zone. If everything lights up, you’re good to go.

If the hob still won’t respond, check the plug and socket. A loose plug can be fixed by firmly re‑inserting it. If the socket feels warm or shows scorch marks, stop using it and have an electrician inspect the wiring.

When an element is dead, you can replace it yourself if you’re comfortable with basic tools. Here’s a quick guide:

1. Disconnect power at the breaker.
2. Remove the hob’s front panel – usually a few screws.
3. Locate the faulty element (it will be cold to the touch).
4. Unscrew the element and disconnect the wiring connector.
5. Connect the new element, screw it in place, and reassemble the panel.

If you’re not sure about any of these steps, it’s safest to call a professional. Trying to fix a control board without proper training can be risky and may void your warranty.

At Bridgewater Appliance Fixers we can diagnose and fix any electric hob issue, from simple resets to full panel replacements. Our team works fast, so you won’t be stuck without a working kitchen for long.

Bottom line: start with a quick power reset, check the plug and socket, and only move on to element or board work if you’re comfortable. When in doubt, give us a call – we’ll have your hob cooking again in no time.